EV charge controller boards, charging software and bespoke charger design
Off the shelf, or bespoke?
Start from our
building blocks
Proven modular charging solution - smart charger controllers, 15118 and OCPP software - the tested modules you assemble a standards-based charger from.
Or a bespoke
charging solution
We design, build and certify a bespoke charger around your product - based on our trusted building blocks, so you reach market faster and with less risk than starting from scratch.
EV CHARGING SINCE 2010
From the MiDDaS project and London 2012 onwards
LONDON 2012
Charge-post electronics for the Olympic vehicle fleet
ISO 9001:2015
Audited design and development processes
4 MARKETS
In production across the UK, Europe, North America and Australia
The modular range
The charging range
Versinetic's modular system allows you to create a charger to meet your requirements, whether it's single or dual socket, single or three phase, European or US standards.
Comms controller
MantaRay
The smart charge point communications controller - OCPP and ISO 15118 ready, the brains of a connected charger.
Explore MantaRayAC controller
EEL
A compact, cost-effective IEC 61851 AC charge point controller for straightforward, standards-compliant chargers.
Explore EELAll-in-one board
CongaEEL integrated charge controller
CongaEEL integrates our EEL board with AC power control relays, current measurement and RDC-DD on a single board - the integrated option for chargers.
Explore the integrated boardRFID · Displays · LEDs
Peripherals
RFID readers, displays and LED boards that complete your charger and speed up integration.
Explore peripheralsEvaluation
Development kit
The Engineering Specification Kit pairs MantaRay and EEL on your bench - evaluate, prototype and de-risk your design before production.
Explore the dev kitSoftware Modules
Charging software
OCPP 2.0.1 library, ISO 15118 / Plug & Charge stack, EVerest development services and a white-label installer app - ready to embed.
Explore softwareEngineering
Bespoke charger design
From feasibility to production, our engineers design a charger around your product on proven foundations, with no tie-ins.
Design a bespoke chargerStandards built in OCPP 1.6 & 2.0.1 · ISO 15118 · IEC 61851 · SAE J1772
Which route?
Building blocks, or bespoke?
Both routes stand on the same proven foundations - the difference is how much of the charger is already decided for you.
Route 01
Start from the building blocks
Best when a proven, standards-compliant platform gets you to market fastest.
- Take a single controller board, embed a software stack, or use the whole platform
- OCPP, ISO 15118 and IEC 61851 compliance from the start, not retrofitted at certification
- Embed the software in your own product firmware, integrated by your own team
Route 02
Go bespoke
Best when an off-the-shelf product cannot match your specification.
- A charger designed around your product, from feasibility to production
- Built on the same proven foundations, with no tie-ins
- You keep your brand, your IP and your roadmap
Still deciding? The development kit puts MantaRay and EEL on your bench so you can evaluate before committing, and how we work shows the route from feasibility to production.
Why modular
A faster, lower-risk route to a bespoke charger
Off-the-shelf chargers are too rigid and full custom development is slow and risky. Our modular solutions give you a proven foundation you can configure around your product - keeping your brand, adding in your IP and your roadmap.
Standards built in
OCPP 2.0.1, ISO 15118 and IEC 61851 compliance from the start, not retrofitted at certification.
Integrate what you need
Choose the modules required and slot them into your enclosure design.
Backed by engineers
A decade of EVSE experience, from the London 2012 Olympics chargers to a fully integrated V2G system.
Where our technology runs From apartment blocks to depots and fleets and kerbside networks, the same modules are configured for the site.
Questions
Frequently asked questions
Should I start from the standard boards or go bespoke?
Start from the standard boards when a proven, standards-compliant platform gets you to market fastest - take a single controller board, embed a software stack, or use the whole platform. Go bespoke when an off-the-shelf product cannot match your specification: our engineers design a charger around your product on the same proven foundations, keeping your brand, your IP and your roadmap.
What EV charging standards do the charging modules support?
The boards and software stacks support OCPP 1.6 and 2.0.1 (Open Charge Point Protocol), ISO 15118 (Plug & Charge and Vehicle-to-Grid), IEC 61851 (AC charging) and SAE J1772 - built in from the start rather than retrofitted at certification.
Can I use Versinetic hardware or software in my own charger product?
Yes. The charging modules are designed for OEM integration. Hardware modules like MantaRay and EEL can be integrated into your charger design, and the software - including the OCPP library and ISO 15118 stack - can be embedded in your own product firmware.
Is there a way to evaluate the platform before committing to a design?
Yes - the Engineering Specification Kit, our development kit, pairs the MantaRay and EEL boards on your bench so you can evaluate, prototype and de-risk your charger design before production.
Can I license the charging software separately?
Yes. The protocol software and IP can be licensed into your own product and integrated by your own team - subscription-free when you buy the hardware modules.
Get in touch
Not sure which route?
Describe the project and an engineer will tell you straight - building blocks, bespoke, or a development kit first. You will hear back from an engineer, not a sales team.